Time to upgrade our solar from 4 to 16 panels now that the frames are made and the charge controller/inverter have been upgraded. After filling in the trench for the higher gauge wire for the new panels, it was time to start installing the 12 new 200 watt panels. I unboxed and installed the first […]
Time to upgrade our solar from 4 to 16 panels Read More »
We finally got started on the 12 volt to 48 volt solar system upgrade.The frames are complete, so time for panels and the new 48 volt charge controller/inverter.After taking everything apart, I was paged. so that slowed down the whole process. Once I was able to get back to work, I did manage to build
12 volt to 48 volt solar system upgrade. Read More »
With this project done, all the solar panel frames are complete now.The last post, I went in a bit more on my set up, and here, I did the same thing, just 2 feet higher up. I sure wish I had already bought the ladder we were talking about buying. The three new frames allow
All the solar panel frames are complete. Read More »
Completing 1 of 3 adjustable solar panel frames is what is on tap for today. Now that the poles are set and the crossbars are up, I can continue with this build. I managed to get off work in time to get a little work done before dark.So, I’m working on finishing up the cross
1 of 3 new adjustable solar panel frames completed Read More »
Time to start expanding the solar panel frames for more panels.With the 12 more panels ordered and arriving soon, We need a place to mount them when they get here.And since the holes are dug and poles secure, it’s time to start working on the frames. First up is attaching the 4 ft cross beams
Expanding the solar panel frames for more panels Read More »
Preparing for more solar panels is on today’s agenda!The last solar upgrade and the clearing of trees wasn’t good enough. I was still having power woes. So, after much research and reading, I finally broke down and found a spreadsheet (then tweaked it) to help calculate exactly what I needed.I had to figure out the
Preparing for more solar panels on the agenda. Read More »
Progress on the faux beam has been made. The angles have slowed down the progress, but just about have it figured out! Now that the wiring is mostly complete, I was able to turn my attention to the fake beam we want in the middle of the room, where we plan to have the ceiling
Progress on the faux beam has been made!!! Read More »
The wiring of the new cabin is complete. Well, mostly. I still have to wiring in two light switches and their corresponding lights. I have the whole day to try to complete the wiring of the new cabin. I had started on it a previous day and hope to finish today.The chickens needed food, though,
Wiring of the new cabin is complete (mostly) Read More »
I removed a part of the loft from the cabin that we decided made the main living area feel too cramped.That was after running to the store for supplies. But with new paddle bits in hand (or in drill as the case may be), I was able to finish drilling the holes for the electric.
Removed a part of the loft from the cabin! Read More »
Now that the new cabin is here, we can start getting it wired for electricity! So, to recap, our plan for this cabin is to use is as a living room, as well as my office since I work from home.We will have a closet and a water closet with our composting toilet.Eventually, we will
New cabin wiring begins Read More »
